Nebra IP67 Waterproof/Weatherproof Enclosure

Nebra IP67 waterproof/weatherproof enclosure for outdoor use. We recommend using this case for the Pi Supply IoT LoRa Gateway HAT for Raspberry Pi. 

The industrial design with heavy-duty double hinges and spring-loaded captive screws sees the case a premier solution.

Designed to withstand the toughest environments, the outdoor enclosure is a light, yet very solid wireless outdoor enclosure that fits most boards in today's market.

Being NEMA-67 rated, it provides complete protection against ingress of dust as well as protection against immersion in water.

Multiple Antenna Options

The N-Type antennas connectors are placed as far as possible from each other in order to increase spatial diversity and decrease RF grounding from the mounting mast.

Up to 5 antennas can be used for repeater operation, multiple band or MIMO smart antenna applications.

Note: We recommend these connectors: N-Type Bulkhead (RP SMA | UFL / IPEX)

Specifications

• 1 x Ethernet and 5 x N-Type holes
• Enclosure Seal Operating temperature: -60C to +230C
• Heat Trap: +6.5 Celsius under full sun (~100,000 Lux)
• Temperature raise using a 5-10Watt heat source: +5.5 Celsius
• Inner dimensions: 210mm x 130mm x 50mm
• Outer dimensions (w/o connectors): 235mm x 155mm x 75mm
• Weight (inc mounting brackets): 1.4 Kg
• Wall thickness: 5mm
• Supports masts: up to 50mm diameter

Packaging Contents

• 1 x Nebra IP67 Weatherproof Enclosure
• 1 x RJ45 ethernet connector system
• 4 x Self-adhesive standoffs
• 1 x Rubber Gasket
• 4 x N-Type chrome-plated brass plugs
• 2 x Z-Type mounting brackets
• 1 x Metal backplate
• 2 x Backplate screws (M3x6mm)

Nebra IP67 Case - Gateway HAT Mounting and Raspberry Pi Expansion Board

This expansion board is designed to fit inside our Nebra IP67 waterproof/weatherproof case in conjunction with our IoT Gateway HAT for LoRa®. However, you don't need to use it with the case and it will work with any three HATs of your choosing. You can purchase this board here.