Cyber22

Please note: If you order an antenna or other accessories at the same time as a pre-ordered miner they will ship all together when your miner is re...

Please note: If you order an antenna or other accessories at the same time as a pre-ordered miner they will ship all together when your miner is re...

Please note: If you order an antenna or other accessories at the same time as a pre-ordered miner they will ship all together when your miner is re...

We recommended using this with our Nebra HNT Outdoor Hotspot Miner. It comes supplied complete with UK, European, USA and Australian pins as standa...

THIS ITEM IS A PREORDER. ESTIMATED DELIVERY APRIL 2021 Quectel EG25-G Mini PCIe is an LTE category 4 module adopting standard PCI Express® Mini Car...

Please note: If you order an antenna or other accessories at the same time as a pre-ordered miner they will ship all together when your miner is re...

CAT6 CAT 6E Waterproof RJ45 connector Ethernet RJ45 outdoor network bridge M20. Shielded IP68 Waterproof Plug cable. 25cm.

UFL/IPEX to N-Type Bulkhead 20cm Pigtail. UFL (Hirose) also called MHF or IPEX. Specifications UFL/IPEX connector: Gold Plated N-Type connector: N...

RF Coax N-Type Male to N-Type Female surge protector for antennas.

The Nebra Raspberry Pi Compute module 4 Flash stick is the easiest way to quickly program your Raspberry Pi CM4. Install the Compute Module and plu...

Power & Ethernet In...Power Over Ethernet Out! The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEE...

2 Gigabit ports ensure faster transmission Complies with IEEE802.3af/at standards, supplies up to 30 W Reduces infrastructure costs by transmittin...

The 1375820-2 is a 2-way 1-row Connector with nylon GF body, 2.54mm pitch spacing and crimp termination. This connector is paired with a 30cm cable...

M20 IP68 Waterproof Nylon Plastic Cable Gland for 6-12mm Cable.

Receive all of the advantages of the Nebra software on your Helium OG Hotspot Miner by purchasing a Nebra Software SD Card upgrade. Instant Sync Ou...

The Nebra Raspberry Pi Compute module Flash stick is the easiest way to quickly program your Raspberry Pi Compute module 1/3/3+. Install the Comput...

Need a replacement 1820mAh battery for your PiJuice HAT? We've got you covered! This battery comes as standard with the PiJuice HAT and we've manu...

LoRa® (Long Range) is the smart, long-range, wireless transmission technology that is enabling the future of IoT (Internet of Things). Our Arduino ...

Receive all of the advantages of the Nebra software on your Sensecap Hotspot Miner by purchasing a Nebra Software SD Card upgrade. Instant Sync Our...

Receive all of the advantages of the Nebra software on your Finestra Hotspot Miner by purchasing a Nebra Software SD Card upgrade. Instant Sync Our...

2,500mAh Lithium Ion battery that can be used with the PiJuice HAT. The PiJuice HAT comes with a 1820mAh as standard, so this 2,500mAh will give y...

Receive all of the advantages of the Nebra software on your RAK Hotspot by purchasing a Nebra Software SD Card upgrade. Instant Sync Our hotspots p...

Receive all of the advantages of the Nebra software on your Pisces Miner by purchasing a Nebra Software SD Card upgrade. Instant Sync Our hotspots ...

The most versatile case for the PiJuice HAT! Our latest and greatest case allows you to combine a number of different HATs and addon boards to crea...

Transform your Raspberry Pi into a media streaming device. Build a full-featured media center capable of playing nearly all of your digital media u...

When plugged into any source, the PiJuice Zero acts as an Uninterruptible Power Supply (UPS) using intelligent power management to keep your Raspb...

Brighten up your Raspberry Pi Zero with the colour coded GPIO header! This 40 pin 2x20 male header is designed to be used with the Raspberry Pi Zer...

The RAK2245 96Boards is a complete and cost-efficient gateway solution base on Semtech SX1301 to help utilize the whole LoRa® system development. I...

The RAK7243 Pilot Gateway Pro is a device that consists of Raspberry Pi 3B+, RAK2245 Pi HAT which includes a GPS module and a Heat Sink for better ...

RAK2245 Pi HAT is a module with Raspberry Pi form factor. It can be plugged into Raspberry PI such as Raspberry Pi 3 Model B+ as a complete RF fron...

RAK2245 Pi HAT is a module with Raspberry Pi form factor. It can be plugged into Raspberry PI such as Raspberry Pi 3 Model B+ as a complete RF fron...

The RAK2245 is a complete and cost-efficient LoRa® gateway solution based on Semtech SX1301 to help utilize the whole LoRa® development system. Dev...

iTracker RAK8211-G is versatile developer board aimed at aiding in quick prototypes using GPRS. The board includes a vast array of connectivity opt...

The RAKwireless RAK83-SPI is a complete and cost effective LoRa gateway solution offering up to 10 programmable parallel demodulation paths. It's p...

The RAKwireless RAK8333-EVB kit is specifically designed for PCIe LoRa Gateways RAK833 which can be quickly used and easily tested by developers. R...

What is a RAK831 Gateway Module? RAK831 is an RF front end of a LoRa gateway. It is able to receive on different frequency channels at the same tim...

What is a RAK831 Gateway Module? RAK831 is an RF front end of a LoRa® gateway. It is able to receive on different frequency channels at the same ti...

Short Crust Plus is the new version of the Short Crust Case designed specifically for the Raspberry Pi Model B+, the Raspberry Pi 2 Model B and the...

We have made the Pi Supply Switch a self-solder kit which is quick and simple to put together even for an absolute beginner to electronics. This me...

PaPiRus Zero is an ePaper / eInk screen pHAT designed for the Raspberry Pi Zero and the new Raspberry Pi Zero W. It's one of the first true low pow...

The Pi Crust Plus is a breakout board for the Raspberry Pi and makes it easy to connect electronics. Features Compact: Adds less than 2mm to the ...

Spice up your Flick Zero and Raspberry Pi Zero with a stylish white and orange Flick Zero case! This vibrant and durable case is made up of three p...

Swipe, tap or flick your wrist to control your I2C device with the Flick Large board. Flick Large is a 3D tracking and gesture board that lets you ...

The Gert VGA 666 (6 bits per colour channel, hence 666) is a breakout/add-on board for the Raspberry Pi Model B+ (will not work with Model A/B as t...

The JustBoom Digi HAT kit is a fully plug-and-play package that is simple to setup and use. No soldering or technical knowledge is needed to get up...

The JustBoom Amp provides a 2x55W (peak) amplified stereo output. Just connect your JustBoom Amp to a set of passive speakers and you can be up and...

The JustBoom DAC Zero pHAT is a plug and play, high resolution, digital-to-analog converter for the Raspberry Pi and is by far the easiest and neat...

The JustBoom Digi HAT is a high resolution digital audio output add on board for the Raspberry Pi. Simply stack the plug-and-play add on board (HAT...